|
Ballasted
Rubber
Membrane
Gen Flex EPMD membranes are approved for use in
a wide range of roofing an reroofing applications. Both have high
tensile strength, excellent puncture and tear resistance, exceptional
dimensional ability, and elasticity, and weatherablity. Beginning
with continuous advancements in the late 70's, we've been on a roll ever
since. The single ply comes in 45 mil or 60 mil thickness.
Elastomeric Roof
Coatings
The fluid-applied Elastomeric Roof Coatings we
use are Conklin Products and have been used in the industry since the
early 70's. The main place we used these coatings is on RV's and mobile
homes, and for commercial use on concrete grain elevators. The Rapid
Roof Product is a water based acrylic latex roof coating system designed
to provide a lightweight, flexible, and seamless weatherproof covering
over a variety of roofs decking substances. Some of these include
plywood, metal and concrete. Lightweight, yet durable, the Rapid
Roof Elastomeric Membrane is many times lighter than a lot of conventional
systems. On concrete grain elevators we add a granule system to make
the membrane a lot tougher for the traffic on a grain elevator roof.
The Rapid Roof System is UL and Factory Mutual approved.
Concrete Grain
Elevator Roofing
We do pressure washing of the roofs to get down
to the fresh concrete and either seal with fluid applied elastomeric roof
coating and granular system or we mop down the base insulation and fully
adhere the Rubber Membrane Roof System. We can determine the best
system for you after looking at your roof.
Sheet Metal
Work
In our shop, we bend all types of metal
flashings and copings on the perimeters of buildings. Usually
sheet metal is required to finish the outside perimeter of a
building. We have a new Roper Whitney Autobrake 2000 with an Orion
control system to bend the metal needed to finish the job. Having this
machine takes out the need to hire another contractor to do the sheet
metal work. Along with the Autobrake we added the 10M14 Shear for
the precise cut in the metal for your project. Feel free to check these
machines out at http://www.roperwhitney.com,
where you
can view pictures of these machines and get the full description.
We use all UNA-CLAD/UNA-FAB
architectural metal products from Copper Sales, Inc. whether it is Galvanize,
Kynar 500 Painted Products, Aluminum, Copper, Muntz, or Stainless.
Metal Roofs
We do metal roofs on old barns, and reroof metal
buildings. We can do either your standard 3 foot panel and fasten
with rubber washer screws or the standing seam panel. We re also
installing the ABC (American Building Components) SL-16 concealed fastener
architectural panel system on home reroofing
 jobs.
The system is UL approved and comes in numerous attractive colors, plus it
has the ability to significantly lower
installation time. There is a 25 year color limited warranty.
Duro-Last
Roofing Systems
Duro-Last is
the world's largest manufacturer of custom prefabricated roofing
systems. We custom order each roof based on measurements of the
exact size of each building and flashing detail. At completion , each
commercial project is inspected by a Duro-Last Factory-trained quality
assurance inspector. Duro-Last is cost effective, reliable and
trouble-free. Hot air welding is used to bond all of the field seams,
which eliminates the need for chemicals, torches, and other unsafe seaming
systems. Once installed, Duro-Last is watertight and virtually maintenance
free.
|
